Call a Specialist Today! 833-335-0426

ADTRAN NetVanta 834T
Four-Port, SHDSL EFM Ethernet NTU

ADTRAN NetVanta 834T

ADTRAN Products
Carrier Ethernet
NetVanta 834T 4-Port Enhanced SHDSL (Annex A/B) Ethernet NTU
#1172834G1
Get a Quote!

Click here to jump to more pricing!

Overview:

Four-Port, SHDSL EFM Ethernet NTU

The NetVanta 834T is a Carrier Ethernet Network Termination Unit (NTU) that terminates up to four e.SHDSL copper pairs. Four 10/100 Ethernet ports are provided for customer use. The NetVanta 834T is designed for cost-effective deployment of voice and data services to small- and medium-sized businesses, bandwidth indoors of up to 60 Mbps. However, typical deployments using outside plant copper for extended distances will be closer to an 8 Mbps service offering. The NetVanta 834T is designed for LAN, WAN and Metro Ethernet extension as well as supporting Voice over IP (VoIP) applications with voice, video and data traffic. Enterprise customers, as well as integrated communications providers like CLECs, ILECs and ISPs, will benefit from this intuitive, easy to install, plug-and-play unit. A key feature of this unit is auto line detection, which enables synchronization with data rates from 192 Kbps to 15 Mbps without operator intervention.

In the event that a single loop fails, the NetVanta 834T will continue to operate on the remaining loop, providing additional resiliency. Once the failed loop is operational again, the NetVanta 834T will automatically detect its availability and will auto-recover to the original configuration.

The EIA-232 craft port enables local access for configuration and status information. The SHDSL Ethernet over Copper provides carriers a management channel to remotely configure and collect status information.

The compact design provides safety and reliability required for customer premises installations. It can be wall or rack mounted depending on customer preference. When wall mounted, the NetVanta 834T only occupies an eight-inch by 12-inch area of the customer's telephone wiring closet. For rack mount installations, custom 19-inch rackmount shelves are available.

Features:

  • Supports Carrier Ethernet services over Copper
  • MEF 9/14 certified supporting standard Ethernet OAM
  • Enhanced SHDSL data rate performance up to 15 Mbps per loop (60 Mbps symmetrical total)
  • Auto-failover and recovery for improved service robustness
  • Symmetrical data transfer rates for upstream/downstream VLAN Management
  • Plug-and-play auto line detection for easy installation
  • Autosensing 10/100Base-T Ethernet
  • Small Form-factor Pluggable (SFP) 1000Base-X Ethernet
  • Spectral compatibility for robust operation alongside other DSL services
  • Supports Terminal and Facility MAC-Swap Loopback to validate service turn up and trouble-shooting
  • Firmware upgrades through the LTU
  • AC power supply
  • Deskmount or rackmount options

Specifications:

NetVanta 834T Specifications
Network Interface RJ-21 e.SHDSL
Client Interface
  • Four Autosensing 10/100Base-T Ethernet
    • RJ-45
    • Auto MDI/MDIX
    • Auto-Rate
    • Auto-Duplex
  • All Ethernet ports may be used for either network WAN or customer-side LAN connections
Management: Console Port
  • DB-9
  • EIA-232
Diagnostics LEDs
  • Power/Alarm LED
  • SHDSL loop status for each loop
  • Ethernet LED
DSL Features
  • Variable rate bonding for the SHDSL loops
  • Auto-failover and recovery
  • Plug-and-play auto-line detection
  • ITU-G.991.2-2003, Annex A & B—SHDSL
Ethernet Features
  • IEEE 802.1p priority marking
  • IEEE 802.1d dynamic/transparent bridging
  • IEEE 802.1Q VLAN tagging
  • IEEE 802.3u Ethernet
  • MEF 9/14 certified EPL, EVPL, ELAN
Fault and Performance Management
  • IEEE 802.3ah EFM standard
  • ITU-T Y.1731 CFM, PM
  • Supports OAM management status and loopback messaging
  • Supports Terminal and Facility MAC-Swap Loopback
Management and Administration
  • Management Methods
  • Craft interface (Local, EIA-232)
  • SNMP proxy through SNMP proxy via TA838 LTU, TA1400S series and TA5000
  • Firmware upgrades
  • Local: YMODEM through craft port
  • Remote: Managed through TA838 LTU, TA1400S series and TA5000
  • Configuration script download
Ethernet Services Support
  • Priority queuing of traffic based on VLAN priority
    • Supports eight class of service queues
    • Per UNI port, CE VLAN ID (C-Tag) and/or CE VLAN P-bits, DSCP fields
  • Single stack VLAN and double stack VLANs (Q-in-Q)
    • Manipulation based on 802.1p and DSCP fields
    • STAG TPID provisioning supports 802.1ad and 802.1Q standards
    • Port-based service support
  • Services Scale and Flexibility
    • MEF 9, 14 compliant EPL, EVPL, ELAN
    • Configurable EtherType and TPID for service flexibility
    • VLAN IDs 0–4095; EVC configurable in the range of 2–4094
    • Configurable MTU from Mini Jumbo frame support (1700 Bytes)
    • 16k active MAC address; Ability to disable MAC learning (32k support future software)
    • Ingress policers (tr3CM), CIR and EIR settings to 64 kbps granularity, Configurable Burst through EBS, CBS settings
    • Egress shaping per port (per port per queue and per up to 16 VLAN groups in future)
  • Resources
    • 64 EVCs
    • 64 EVC Maps
    • 64 Policers
    • 4 EFM Group
Operating Temperature -40 to +149F (-40 C to +65C)
Storage Temperature -40 to +185F (-40C to +85 C)
Relative Humidity Up to 95%, Non-condensing
Dimensions 1.75 in. x 12 in. x 8 in. (H x W x D) (44 mm x 305 mm x 204 mm)
Weight 4 lbs (1.8 kg)
DC Power Universal power supply 100 - 240 VAC, 50/60 Hz
Power Dissipation 11 watts maximum
Regulatory Agency Approvals
  • FCC Part 15 Class A
  • FCC Part 68
  • UL 60950, CAN/CSA C22.2 No. 60950
  • EN 60950, IEC 60950, AS 3260/ AS NZS60950
  • NEBS Level 3
  • S043.2
  • ITU-T K21:2000 Basic

Deployment:

NetVanta 834T Deployment

Documentation:

Download the ADTRAN NetVanta 834T Datasheet (PDF).

 

ADTRAN Products
Carrier Ethernet
NetVanta 834T 4-Port Enhanced SHDSL (Annex A/B) Ethernet NTU
#1172834G1
Get a Quote!