Call a Specialist Today! 833-335-0426

ADTRAN NetVanta 1131
Redundant /External Power Supply Unit

NetVanta-1131

ADTRAN Products
External Power Supply Unit
Adtran NetVanta 1131 Redundant/External Power Supply Unit
#4700531F1
Get a Quote!

Click here to jump to more pricing!

Overview:

With growing number of Power-over-Ethernet (PoE) powered edge devices, and the explosion of multi-media traffic and cloud-based apps on the Local Area Network (LAN), having a resilient network infrastructure is essential to your business. The key to having a resilient network is to ensure uninterrupted power.

ADTRAN® addresses this need with the NetVanta® 1131 RPS/EPS unit, which provides redundant power and supplemental power to select NetVanta 1200, 1500 and 1600 Series Ethernet switches.

Hardware

The NetVanta 1131 has three Redundant Power Supply (RPS) outputs and one External Power Supply (EPS) output. The RPS outputs provide backup power for a NetVanta switch’s internal power supply. The EPS output provides 370 watts of backup PoE for PoE redundancy, and can also provide up to 370 watts additional PoE, for select NetVanta switches, for a total of 740 watts of available PoE budget power.

Alternate Power Supply

The NetVanta 1131 RPS/EPS unit provides redundant power feeds via an alternate AC power circuit. In this instance, the NetVanta switch is connected to the primary AC circuit, and connected to NetVanta 1131 RPS/EPS, which is powered via an alternate AC power source. Should the primary AC circuit fail, the NetVanta 1131 RPS automatically provides power feed to the connected NetVanta switch eliminating any downtime.

Internal Power Supply Backup

The NetVanta 1131 RPS output provides redundancy for NetVanta PoE and non-PoE switches in the event of an internal power supply failure. In the event the switch’s internal power supply fails, the NetVanta 1131 would power the NetVanta switch until the power unit is replaced or swapped out.

Redundant PoE Budget

The NetVanta 1131 EPS output provides external backup power supply to the NetVanta 1235P and the 1500 and 1600 Series PoE switches, in case the internal PoE power supply fails. The NetVanta 1131 can provide up to 370 watts of redundant PoE budget to ensure PoE-powered edge devices such as VoIP phones, wireless Access Points (APs) or IP security cameras operate without interruption.

Supplemental PoE Power

The NetVanta 1131 EPS output can also provide supplemental power up to 370 additional watts, for the NetVanta 1235P, 1544P (2.1 Gen) and 1638P switches. This provides increased power wattage, effectively doubling the available PoE budget, enabling these NetVanta switches to support greater number of PoE or PoE+-powered edge devices. The NetVanta 1131 EPS’ internal power management enables efficient budgeting of available PoE power.

Features:

  • Redundant and Extended Power Supply for NetVanta switches
  • Redundant Power for up to three NetVanta switches
  • Enables NetVanta switches to be powered from Dual AC circuits
  • Backup 370 watts PoE budget power for select NetVanta PoE switches
  • Additional 370 watts PoE budget power for select NetVanta switches
  • 1/2 rack width, allowing two NetVanta 1131s to be mounted using the optional dual mounting tray
  • Plug-and-play operation— requires no manual configuration

Supported Switches

  • NetVanta 1235P with ActivReach
  • NetVanta 1534/1534P
  • NetVanta 1535P with ActivReach
  • NetVanta 1544/1544P
  • NetVanta 1638/1638P with and without ActivChassis

NetVanta-1131-RPS-EPS

Specifications:

NetVanta-1131

NetVanta 1131 Specifications
Physical Interface
  • Three RPS connectors
  • One EPS connector
Redundant Power Supply (RPS)
  • Three RPS ports
  • 12V at 10A
  • Capable of powering a single switch
External Power Supply (EPS)
  • One EPS port
  • 50V at 7.5A
  • 370 watts of backup PoE budget
  • 370 watts of supplemental PoE power
Supported Switches
  • NetVanta 1235P with ActivReach
  • NetVanta 1534/1534P (2nd Gen)
  • NetVanta 1544/1544P (2.0 and 2.1 Gen)
  • NetVanta 1535P with ActivReach
  • NetVanta 1638/1638P with or without ActivChassis
NetVanta 1131 LED Diagnostics RPS Status
  • Off – RPS not connected
  • Green (solid) – RPS connected, internal supply OK
  • Red (solid) – RPS connected, internal supply failed
EPS Status (PoE product only)
  • Off – EPS not connected
  • Green (solid) – EPS connected, internal supply OK
  • Red (solid) – EPS connected, internal supply failed
Environment
  • Operating Temperature: 32° to 122 °F (0° to 50 °C)
  • Storage Temperature: -4° to 158 °F (-20° to 70 °C)
  • Relative Humidity: Up to 95%, non-condensing
Physical
  • Chassis: 0.5U, 19 in. dual mounting tray supports two NetVanta 1131 units
  • Dimensions: 1.7 in. x 8.5 in. x 13.6 in. (H x W x D) (4.3 cm x 21.6 cm x 34.5 cm)
  • Weight: 6.0 lbs (2.8 kg)
  • AC Power: 110–240 VAC, 5.7A, 50/60 Hz
Minimum Requirement
  • AOS 10.9 and above
Warranty
  • Limited lifetime warranty
Agency Approvals
  • FCC Part 15 Class A and UL 1950/CSA
  • North America EMI/EMC Class A
  • UL/CUL
  • International EMI/EMC Class A
  • CE Mark
  • C-Tick for Australia
  • RoHS 6/6
Approved Countries
  • USA
  • Puerto Rico
  • Guam
  • Canada
  • United Kingdom
  • Italy
  • Finland
  • Sweden
  • Denmark
  • Belgium
  • Netherlands
  • Estonia
  • Latvia
  • Lithuania
  • Poland
  • Czech Republic
  • Slovakia
  • Romania
  • Bulgaria
  • Greece
  • Malta
  • Portugal
  • Slovenia
  • Hungary
  • Luxembourg
  • Austria
  • Cyprus
  • Spain
  • Germany
  • France
  • Ireland
  • Norway
  • Iceland
  • Mexico (formal testing not required, designed to meet the requirements)
  • Australia except Telstra

Documentation:

Download the ADTRAN NetVanta 1131 Datasheet (PDF).

 

ADTRAN Products
External Power Supply Unit
Adtran NetVanta 1131 Redundant/External Power Supply Unit
#4700531F1
Get a Quote!